bluezone group
  • Newcastle: +61 (0)2 4964 3500
  • Melbourne: +61 (0)3 8720 0300
  • Perth: +61 (0)8 6595 1500
FLOWLAB Technologies
FlowLab Technologies are specialists in the measurement of fluids and provide a a complete range of instruments for flow measurement. FlowLab provides instruments with two measurement technologies: electromagnetic and ultrasonic (transit time). Electromagnetic flow meters can be used in all types of conductive fluids including water (raw & treated) and waste water. Ultrasonic (transit time) flow meters operate in all types of fluids, even non-conductive fluids.

Electromagnetic and Ultrasonic Flowmeters Electromagnetic and Ultrasonic Flowmeters (355 KB)

Electromagnetic Flowmeters  
  • For pressurised pipes only
  • For all types of conductive fluids (5uS )
  • Principal applications are for water (raw, treated) and waste water
FLT40 +FLT01 - Insertion flowmeters
  • Value for money flowmeters 
  • For permanent or temporary installation
  • Can be powered 12v/24v DC or 220v AC or work with internal batteries.
  • Easy Installation  using taping connectors (welded/thread) or saddles using (1” min) + stop valve.
  • Can be installed without interruption of flow 
  • Bi-directional measurement of flow velocity. 
  • Flowmeter provided with pulse outputs and with a 4-20 mA output 
  • Internal data logger 

 FLT40 +FLT02 Full Bore Flowmeters
  • For permanent installation, powered or not . 
  • Pipes must be cut and flow interrupted for installation

Ultrasonic Flowmeters
  • For all homogeneous fluids (including non-conductive fluids)
  • Usually water raw, potable  or pure-process (more rarely for waste water)
For Pressurised Pipes - FLT 10 + FLT25 (Wetted Sensor)
  • Better accuracy than electromagnetic insertion flowmeter
  • As accurate as  full bore electromagnetic
For open channels - FLT10 OC  + FLT25 OC + pressure/level sensor
  • This type of measurement and installation is combines an ultrasonic velocity measurement (minimum 2 sensors, usually 4 ) combined to a level measurement (using pressure or ultrasonic in air sensor)
  • Installation is specific for each site condition 
Other Products

 FLT10 PN – Portable Ultrasonic Flowmeter
  • Clamp-on or "dry" sensors that do not require insertion or taping machine 
  • For temporary measurement or punctual control usage
 FLT40FH - Fire Hydrant Electromagnetic Flowmeter

FLT40 FH Brochure FLT40 FH Brochure (833 KB)

  • Integrated full bore sensor 
  • Dedicated to fire hydrant control 

Contact UVS Trenchless Technology